leftsweb.blogg.se - Simpleimage linux

#Simpleimage linux install#
#Simpleimage linux serial#
#Simpleimage linux Patch#
#Simpleimage linux software#
#Simpleimage linux download#

Use the Down-arrow key to scroll down and select the Serial port setup option, and press Enter.

A menu of configuration should appear.

Start minicom on your host machine in configuration mode.

This requires the root login or prepending each command with sudo. The commands discussed in this section are meant to be performed by a privileged user account. The ML405 uses a serial debug port to communicate with the host machine.

Connect the power supply to your board.

Connect the Platform cable to your board, then connect the Platform cable to your host machine.

If you are using an Ethernet hub or switch, connect the board to the hub with a straight-through Ethernet cable, then connect the hub to the second Ethernet port of your workstation.

If you are using a cross-over cable, connect the Ethernet port of the board to the second Ethernet port of your workstation.

Connect the debug port of the board to the serial port of your workstation using the null modem cable.

Once you have all of the necessary components, you should perform the following steps: Projects corresponding to Timesys Starting Points are available at: /docs/wiki/ml405/Xilinx_ML405_Hardware_Designs Note that you must have a licensed version- WebPack does not support the Virtex 5.

Workstation with Xilinx Platform Studio.

#Simpleimage linux Patch#

Ethernet Crossover Cable or Ethernet hub/switch and Ethernet Patch Cables.To boot the Xilinx ML405, you will need the following items: An available serial port on your Development Host.One to communicate normally with your LAN/WAN while installing host packages, the other to communicate solely with the target board. If you are booting your root file system over the network, you will need two network cards installed and configured in the Development Host.These are found in the output directory of your online build, or in the directory build_powerpc-timesys-linux-/images/ on the command line. A copy of the Linux Kernel (-2.6.29-ts-powerpc) and Root File System () for the Target Board downloaded from Factory.Root or sudo permission on the Development Host.An internet connection on the Development Host.While you can use nearly any modern Linux distribution released in the last 24 months, Timesys recommends one of the following:

#Simpleimage linux software#

To properly boot a board using software from Timesys, your host machine must meet the following requirements: This document will describe in detail the procedures for booting a Linux kernel image and mounting a root file system over NFS on the Xilinx ML405.

Disable SELinux and Firewall on Fedora Core.

It makes me wonder why it is not used as the default image viewer in GNOME or other desktop environments and distributions.Īnd about default AVIF support in Linux, sooner or later it will be added. GThumb is an extremely versatile and capable application. You can now enjoy AVIF images on your Linux desktop. Thumbnails for AVIF images also get displayed Once you open AVIF images with gThumb, they should also be displayed with thumbnails. GThumb shows all the images from the same folder in thumbnail format under the opened image. Here, select gThumb, make it default for AVIF images and open it. Once installed, select an AVIF image, right-click on it and select “Open With” option.

#Simpleimage linux install#

On Ubuntu and Debian-based distributions, use the following command to install gThumb. It should be available in the repositories of most Linux distributions, if not all. There is a handy image viewer called gThumb that can be used for opening AVIF images on Linux. There is always a workaround when it comes to Linux. So, what’s the solution? Can you not view AVIF images on Linux at all? No thumbnails for AVIF imagesĪnd if you try to open it with the default image viewer, it is likely to show ‘unrecognized image file format’ error.

#Simpleimage linux download#

If you download an image in AVIF format from the web, it won’t display the thumbnail. However, AVIF image format is not yet supported by default in many distributions. Linux has started providing WebP support recently. They are smaller than WebP for the same image quality. Now, AVIF is a new file format that compresses images without sacrificing quality. WebP is a relatively newer format that produces better-quality images with significantly smaller sizes. JPEGs reduce the file size but they reduce the quality of the images significantly. PNGs are the best when it comes to quality but they are huge in size and hence not ideal for websites.